A little while ago I told you about the Axoloti and how much I like it. But because it’s just a bare pcb without casing, I didn’t get to use it in practical context very much. Now I had a little time to design a 3d-printable enclosure. Continue reading “AxoStomp”
Pythagoras of Samos was a man with many hobbys. I know him primarily for his experiments with strings and their musical properties. Thats why I call this robotic string instrument “Pythagotron”.
- 2 octaves of pitch range
- fast and precise intonation
- 4 actuators for striking, muting, punshing, damping and shorten the string
- modular and parametric design (OpenScad)
- most parts are 3D-printed or easy to gather
- open source
This is a Honey extractor. It is used to fling the honey out of the honeycombs you put in there. There is one Knob to set the speed and a three way switch to make it spin left or right op to stop it.
Here is a new Techtar video showing some examples of the squencer-module modulating the Kickup and a low pass filter. This time with comments:)
Hi, just want to show you a new project I’ve almost finished:
-3-channel brightness control (each two of the bulbs are separately dimmable)
-adjustable focus position via stepper driven mechanic (see pictures)
-wireless remote controlled (3channel brightness + focus position)
-remote can be hooked to a computer to control the lamp via client e.g. for
-most parts are 3d-printed, the rest of them are easy to gather
-6 Standard 5W Led GU5.3 bulbs
It was originally designed to be a living room lamp, but with color filters
(different color attached to each channel) plus a small disco ball, it think
it’s a nice disco lamp too:)
Today I’d like to talk about the Techtar’s Ampmod sound module which does
what I call “pitch dependent polyphonic amplitude modulation”.
I demonstrate it in this video:
Today I want to start the documentation of my favourite project.
I’m on it for quite a while now and probably will be, as there
are still plenty of things to do.
I’m going to start with this short blog post and the video below,
to show you some sound examples and pictures of the Techtar.
A printable A-B-Stereo Microphone
I wanted to have a mic which I cought use for general purpose recording in conjunction with my old iriver h120 (with rockbox installed). I didn’t found a suitable mic without a build in recorder:)
A well functional e-drum trigger pad. Most parts are 3d-printed. It’s still work in progress but I’m very happy with the results so far. You can watch the progress on thingiverse and for most recent changes look on my git repository.
I have started to build 3d-printed e-drums. Here are some photos of the fist design for the Kick-trigger: